Event id ... i know you told me to keep out Seth

[Guest110]

Can anyone shed some light on this error please

as im curious .. again

[rVidia]

BM, can you do the following?

1) Go to Start > Run > dcomcnfg > click OK
2) Double-click "Component Services"
3) Double-click "Computers"
4) Right-click "My Computer" > select Properties
5) Open the "COM Security" tab
6) Under "Launch and Activation Permissions" click "Edit Limits"
7) Make sure "Administrators" is selected
8) Take a screenshot

Then, go through steps 6-8 again, but click "Edit Default"

After, if you could attach those screenshots, that may
be of some help.

[Guest110]

Ok i will try

[rVidia]

Alright, sounds good BM. I have to run out for a bit, but I'll be back later. ;) Hang in there!

[Guest110]

hope this is correct

[Guest110]

The reason i am curious is i have random shut offs again .. have done all the usual steps and wondered what this error means ....

[rVidia]

Thanks, BM. Can you take a few more screenshots for me?

1) Open the "COM Security" tab
2) Under the first section, "Access Permissions," select the button labeled "Edit Default"
3) Select "SYSTEM" and take a screenshot
4) Select "SELF" and take a screenshot
5) Open the "Default Properties" tab
6) Take a screenshot

I'm just trying to see what all of your settings are to see if I can figure something out to help solve the problem.

Thanks for the cooperation, BM :whip:

[Guest110]

I have looked and all the settings are all ticked allow apart from one

access permissions default remote access for system has not got a tick

[rVidia]

Under the "Default Properties" tab, is "Default Impersonation Level" set to Identify? And under COM Security > Launch and Activation Permissions > Edit Default, what is checked for SYSTEM?

[Guest110]

yes to the first one

and all checks for system all ticked allowed

[rVidia]

On my system, "Remote Launch" and "Remote Activation" are unchecked. Try unchecking them.

[Guest110]

Okay done that
should i keep an eye in event to see if the error reappears

[rVidia]

Yes, I would do so.

[Guest110]

Thank you so much for your help:D
Appreciated as always:)

[rVidia]

My pleasure. ^_^

[Seth]

I just got a minute as I'm very busy today:

BM, do you have an HP printer?

Also, for the shut down. Disable the auto shutdown on errors.

[Guest110]

No Seth i havent got a Hp printer